iAdaptAir 2.0

Can I turn off the ionizer on my iAdaptAir?

Yes. Once the air purifier is powered on, press the power button a second time and will see the ionizer icon turn off. It can also be turned off via the Air Oasis Home app.

Does the iAdaptAir produce ozone?

No, the iAdaptAir has been third-party validated by Intertek labs to standards for no ozone production. They are listed by the State of California as CARB compliant.

How do I turn off the lights in the Legacy iAdaptAir/iAdaptAir 2.0?

In the Legacy iAdaptAir and the iAdaptAir 2.0 to turn off the control panel lights, simply hold down the Lock/Night Mode Icon for five seconds. Repeat this process to unlock controls and turn the lights back on. In the Legacy iAdaptAir and in the iAd

Will the iAdaptAir get rid of mold and mycotoxins?

The iAdaptAir 2.0 will trap airborne particles down to 0.05 microns in size including airborne mold spores. The carbon filter and bi-polar ionizer will reduce mycotoxins. No air purifier can take the place of mold remediation or mitigating mold in w

How long should I run my iAdaptAir?

The Air Oasis air purifiers are built to run 24/7. Using AUTO mode is a good way to maximize filter life and reduce electrical costs. You can also use the scheduler in the Air Oasis Home app to ensure the air purifier is turned off during routine tim

How do I know when it's time to replace the filters?

For the iAdaptAir 2.0 Press the i or toggle button on your control panel to view the remaining filter life percentage. When the percentage reaches close to zero you should replace the filters. This is typically between 6 to 24 months depending on env

How small of a particle will an iAdaptAir 2.0 filter?

The iAdaptAir H13 HEPA filter traps allergens, dust, mold spores, bacteria and viruses down to 0.05 microns.

Does the iAdaptAir produce hydroxyls?

The iAdaptAir utilizes a unique form of bi-polar ionization that produces positive and negative ions. The ions form hydroxyls on the surface of mold to sterilize it. Our units have been third party tested for safety by Intertek Labs, have the ETL saf

How does Bi-Polar ionization work?

Bi-polar ionization is a simple and safe ionization process that uses both positive and negative charges to separate water molecules into positive hydrogen and negative oxygen ions without the production of ozone. The ions seek out and destroy contam

Do UV lamps contain mercury?

The iAdaptAir series utilize UVC LEDs that do not contain mercury, have a much longer lifespan than UV bulbs, a more consistent UV output and do not produce ozone.

How does UV light technology work?

UV light in the UVC spectrum will produce photons capable of penetrating cell walls of biological contaminants. The photons then disrupt the DNA and therefore sterilize the contaminant rendering it harmless.

Is the UVC light inside my air purifier safe?

Yes, Our air purifiers have been third-party tested for safety by either UL or Intertek Labs. While direct exposure to UVC can cause damage to skin and eyes, extensive testing has been performed to ensure potentially harmful levels of UVC rays do not

Who certified the iAdapatAir 2.0?

Intertek Labs certified the iAdaptAir 2.0 for safety and ozone. However, if there is a specific certification you need please let me know.

How do I disable the wifi capabilities?

The iAdaptAir 2.0 allows you to completely extract the wifi chip from the unit for any of our EMF-sensitive customers.

Are the legs required on the 2.0?

The legs are not required to be used as they are an option for customers who'd choose to attach them. Once the legs have been attached; to get them off the screws will need to be removed on the bottom casing to detach each leg individually.

Why does my 2.0 Purifier read "0" when it's working?

The 2.0 Purifier is designed to clear the air quickly and efficiently, but the reason it may show a reading of "0" on the air quality sensor is that the purifier is often working faster than the sensor can detect. The purifier removes airborne partic

How do I connect to the app?

Furthermore, once you have done so if the connection process doesn't pair, then please reach out with any specific issues, such as the purifier beeping every minute or getting stuck on a loading screen.

Which way do I insert my new filter in the iAdaptAir?

You may insert your new filter with the HEPA(White) side facing outwards, and the Silver Ion side of the filter should be facing inwards.